|
|
|
|
|
|
HomeCar CareExterior CareCleanersPOR 15 CYCLE FUEL TANK REPAIR KIT |
|
|  | | | Customer Reviews: | | | Average Customer Review: ( 8 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
11 of 11 found the following review helpful:
 Brilliant! Aug 05, 2008
By J. Diller
POR-15 Inc. makes many different coatings for various purposes. This kit includes 3 main components: a bottle of MarineClean, which dissolves the old gas, gunk, and varnish that accumulate on gas tanks that have been sitting for a long time; a bottle of MetalReady, which neutralizes existing rust in the tank (converting it to a phosphate); and a can of the POR-15 tank coating, which will finish the job and leave your gas tank looking just like new. The kit also included instructions, a piece of pinhole patch cloth, and a foam brush.
I used this kit on a 1982 Honda CM250C that had been sitting for over 20 years! The inside was absolutely horrendous with rust and gunk. When I got to the MetalReady step, I found out that the rust had eaten through the tank in some places, seams and pinholes, stuff like that. Fortunately, the kit came with a patch kit; a small piece of thin cloth, that when soaked in POR-15, became an impenetrable patch. Now the inside of my tank looks absolutely pristine, completely blemish-free and sealed. Now I gotta paint the outside of the tank so it looks as good as the inside!!
One note: be sure to wear latex gloves - They're not kidding when they say this sealer won't come off! I had a 'metal finger' for a couple weeks!
4 of 4 found the following review helpful:
Bullet proof Jun 15, 2010
By Kevin Hoskins
"Yammerha"
Great product, so far. This is not an after work project, you will want to dedicate a whole day to do the job correctly. You will also want to paint the tank afterwards as it can get a little messy. Unfortunately my tank is powdercoated and I had to seal the tank after coating because I didn't know if the sealer would stand up to the oven now I have a few silver fingerprints on the tank. This stuff tracks like never-sieze but becomes permanent. All three products work as advertised. My tank sat since 1977 and now the inside looks as good as new. And of course dealing through Amazon, for me, has always gone smooth.
3 of 3 found the following review helpful:
gas tank kit Jun 17, 2010
By Douglas Erickson
very fast shipment. easy to follow instructions. highly recommended product for anyone needing to refurbish their gas tank.
1 of 1 found the following review helpful:
Great solution! Mar 03, 2012
By Gary Shafer
I read the previous reviews and decided I would try this out. I am very happy with the results! I was facing a big cost for having this done to my motorcycle gas tank and decided to do it myself. The directions are very good and simple to follow. I did what they said and then some. I did have to call about a minor detail and they were very helpful. I would strongly recommend this to anyone. Definately makes sure you have enough sealer before you start. I bought a 2nd half pint and I was happy with the coverage. So far so good. This saved me hundreds of dollars.
Good buy May 21, 2012
By Matthew J. Bartlett
"fisherman"
The product worked good, we used it on a suzuki dirtbike tank that was metal and had a lot of rust and gum built up in it. I would recommend leaving the rust remover in for the full period of time, I think it just started to work when we dumped it out. Keeping that in mind the sealer looks great and is very solid. Looking forward starting the bike up and running it soon.
See all 8 customer reviews on Amazon.com
|
| | |
|
* Estimated shipping rate for US 48 states. Final rate calculated at checkout. |
|
|
|
