|
|
|
|
|
|
HomeAutomotiveTools & EquipmentEVERGLASS, QUART |
|
|  | | | Customer Reviews: | | | Average Customer Review: ( 2 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
Superior filler Apr 04, 2012
By HMM
I used this Kevlar filler (Evercoat 632) to repair the lower back panels on my Ford pickup...
--- which had rusted out with 3-4 inch diameter holes where Ford created a lip on the bottom to attract mud/salt and subsequently rust.
I applied fiberglass tape (large hole)to the impacted area...overlapping the tape and extending the tape out to solid metal (sanded to bare metal!).
--- then spread two coats of the Evercoat 632 over the tape...working the filler into the tape and then tapering....sanding well between coats.
Granted, it will not eliminate the rust, but it will eliminate cutting and torching...at least for the immediate future.
For beginners, the 1 ounce creame hardener which comes with it looks far too inadequate, but if used correctly...
--- it is good for the container.
I suggest wearing a full organic filtered mask (not a cheapo) when using this product (or other fiberglass fillers) and nitro or rubber gloves...
--- fiberglass filler on your hands is bad news.
Real Good Goop Sep 05, 2011
By Dale Rhodes
This is the good stuff! Whether you're doing auto body repair, or like me, you're building a custom water-cooled computer and need to fill in holes or smooth out seams, this product is the best! Easy to mix and apply, dries quick, has strong adhesion to any surface, sands perfectly, and is able to take some flexing without cracking. What more could you ask for? Bondo is dead - Evercoat is king! Long live Evercoat 632 Everglass Short Strand Fiber Reinforced Filler!
|
| | |
|
* Estimated shipping rate for US 48 states. Final rate calculated at checkout. |
|
|
|
