|
|
|
|
|
|
HomeSpray GunsDevilbissAIRBRUSH QUICK DISCONNECT COUPLER-Hose Fitting Release |
|
|  | | | Customer Reviews: | | | Average Customer Review: ( 16 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
10 of 10 found the following review helpful:
 Leaky Jan 26, 2011
By Wade Colpitts
I bought the quick coupler from TCP through amazon. TCP has poor communication and I have sent 2 emails to them without any response over 4 days so far. The coupler leaks really bad and causes issues with the airbrush. I would not recommend purchasing this item from TCP. If you can find a more reliable supplier who actually responds to customers complaints and issues, especially when the product they sell is faulty, use them instead. I would've written a positive review if they responded and communicated with me to rectify the issue. I do realize that sometimes products are faulty and no fault of the supplier. But there is no excuse for poor communication (no communication)when a problem does arise.AIRBRUSH QUICK DISCONNECT COUPLER-Hose Fitting Release
6 of 6 found the following review helpful:
 quick coupler Nov 21, 2010
By Ed
Its a great great product, but will not work on the Paasche airbrush, didnt know that when I bought it.
6 of 6 found the following review helpful:
 Takes some work to get it to work properly Sep 17, 2010
By Fubeca150
Hooked it up. The good: the quick disconnect works, and is great when it comes time to clean up. The bad: the connection on the airbrush side didn't have a solid connection, and leaked air like crazy. After wrapping my airbrush connector threads with a TON of sealant tape (15+ wrap-arounds, anything less still leaked some air) it started working without leaking. The connection directly to my compressor was perfect with a single wraparound.
4 of 4 found the following review helpful:
Excellent time saver and good quality product Apr 21, 2010
By M. Aquino
"AQ"
I have 5 airbrushes and am constantly switching back and forth between them depending on the project I am working on. I have an Iwata PowerJet with 2 hookups but at times it is still a little inconvenient to stop and unhook the airhose from the airbrush and or compressor, especially if I have a good pace and rhythm going. I looked at the branded quick disconnect locally but they were $10 to $15 a piece!
Received these and they hook up nicely all my airbrushes. I have two Iwatas, an Aztek, a Masters and a cheap Chinese knock-off. When I tried to connect a 3rd party hose to the bottom of the coupler I found that I could not get it to screw in more than one turn. That one fit fine direcly into my airbrushes.
I tried the hoses that came with my Iwata and Master airbrushes, even the Chinese one and they fit perfectly!. So be sure to take a coupler with you to the store to make sure the hose fits or at least be sure to buy from the same manufacturer of one that fits.
At first there was a slight hiss indicating an air leak from the coupler but untwisting and twisting the hose coupler took care of that so the o-ring probably wasn't seated right.
Now I can go faster without so many frequent stops to change the airhose. Highly recommended. I wish they only sold the barb that connects to the airbrush separately was well because you only need one coupler per hose and then you can switch freely between them, but for $7 who cares?
2 of 2 found the following review helpful:
awsome!!!!!!!!!! May 04, 2010
By fishnguy72
great product!!!!!!!! i have 4 airbrushes & got tired of the octopus of airhoses off my splitter, so i got some of these!!!! they work great & are very easy to use!!!!!! i highly recommend, worth every penny!!!! get one for every airbrush & simplify your life!!!!!!!!!!!!!!!!
See all 16 customer reviews on Amazon.com
|
| | |
|
|
|
|
|
