|
|
|
|
|
|
HomeBody Shop SuppliesPaintKustom Shop6-Way Airbrush Air Hose Splitter and Regulated Metering Manifold |
|
|  | | | Customer Reviews: | | | Average Customer Review: ( 2 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
 Airbrush Station Setup Jan 19, 2012
By redslider
At first I was skeptical about the product viewing it online. After it arrived, I saw that it was better than I had expected. I was at first confused by the mounting of it as to where it would be stationary, then I bought one simple fitting to connect it to a moisture filter/regulator that allowed it to be held in place on the outgoing side of the filter. It is easy to access the air controls and the hoses that connect to it are attached through a guide for each hose I made from a simple piece of pine. Works great for using the amount of colors I work with.
 Good idea poorly rendered Oct 08, 2010
By Plankwing
I did not understand from the product description that the output connections were not standard airbrush fittings. I had to spend over 40 bucks to get correct hose fittings. Also, no provision for mounting so I had to cobble up a mounting bracket. I also do not like the input opposite the valves and 90-degrees to the outlets. It would be more handy if the inlet and outlets were opposite and the valves at 90-degrees to the inlet. As it is, the valves "hide" behind the airbrush hoses making them inefficient to access. If I had to "do it over" I would either make my own or search for some other product.
|
| | |
|
* Estimated shipping rate for US 48 states. Final rate calculated at checkout. |
|
|
|
